High-Temperature Camera SystemsHigh-Temperature Camera System
HD-SDI Full HD/300M/500M/4K
Double-wall stainless-steel housing. Cooling air exits at the front to form a dust-protective air curtain over the lens. Suitable for ambient temperatures up to 500°C under the specified cooling conditions.
Double layer stainless steel housing for air cooling.
Cooling camera bellow 40°C.
Motorized auto focus.
PoE—Power Over Ethernet Route From NVR.
Temperature detector on camera, display on screen,
alarm output to buzzer. (Optional)
Resistant to ambient temperature over 500 °C.
High pressure air emission from front window becoming
air curtain to clear lens.
An air or water heat exchanger can reduce camera temperature below 45°C.
The camera connects directly to the video / network power-supply system.
With an HD-SDI Full HD camera, existing cabling can be retained
Optional temperature sensor with real-time on-screen temperature display and temperature alarm.
| Camera | |
|---|---|
| Image Sensor | 1/2.8”3.21M Progressive Scan CMOS |
| Lens | 2.8 ~ 12.0mm (F1.2) motorized, auto IRIS |
| Min. Illumination | Color: 0.05 lux, B&W: 0 lux |
| IR | 42 IR LED |
| PoE | IEEE 802.3af |
| Video | |
| Streaming | Triple Streaming |
| Compression | H.264, M-JPEG |
| Resolution | 2048x1536, 1920x1080, 1280x720, 704x480, 640x352, 320x176, 160x96 |
| Max. Frame Rate | 30fps, 25fps |
| Bit Rate Control | VBR, CBR (H.264 only, 32K~12Mbps) |
| Frequency Control | 60hz, 50hz |
| Buffer | Max. 5.6Mbyte pre/post alarm buffer |
| Privacy Masking | 8 privacy zone |
| Motion Detection | On (144 block selection), Off |
| Video Analytics | - |
| Stabilizer | - |
| Enhancement | WDR (1~50, Off) |
| Day & Night | TDN (Auto, B&W, Off) |
| White Balance | Auto |
| Noise Filter | 2DNR (On, Off), 3DNR (On, Off) |
| Image Adjustment | Hue, Saturation, Brightness, Contrast |
| Sharpness | Level 0~5 |
| Automatic Gain Control | Level 1~120 |
| Shutter Speed | Auto, Manual (1/30~1/24000) |
| Sense-up | Level 0~5 |
| Flip | Vertical (On, Off), Horizontal (On, Off) |
| PTZ | - |
| Interface | |
| Video Out | -1 analog out |
| Audio In/Out | -2 way (1in, 1out) |
| Audio Compression | -G.711 |
| Alarm In/Out | -1DI, 1DO |
| Serial Port | -RS-232C, RS-485 |
| Peripherals | -1USB2.0 |
| Memory Slot | -2 Micro SD/SDHC |
| Network | |
| LAN | 10/100-base-T (auto sensing) |
| Protocol | HTTP, RTSP(RTSP/UniMulticast), TCP/IP(v4/v6), UDP, FTP, Telnet, HTTPS, RARP, PPPOE, SNMP, PAP, CHAP, DHCP, NTP, SMTP client, uPnP & etc |
| Standard | ONVIF (Profile S) |
| Viewer | Browsers (IE, Chrome, Firefox, Safari etc) Quick Time, VLC |
| Dynamic IP | DDNS (www.ipctvdns.com) |
| Smart Solution | IPCAM(VISION (iOS, Android) |
| Security | HTTPS, Encrypted & Basic Authentication |
| Hardware | |
| System | 32bit Embedded Linux, 256Mbyte SDRAM, 128Mbyte NAND Flash |
| Approvals | KCI/FCC/CE, RoHS, IP66 |
At a Glance
Operating Environment
High-temperature, hazardous, dusty or continuous-process environments requiring remote visual monitoring.
Key Benefits
Improve process visibility, reduce personnel exposure and relay anomaly information to the monitoring center.
Integration Options
Networks, alarms, thermal imaging, AI vision and centralized monitoring can be configured to suit project requirements.
Engineering Requirements
| Requirement | Information to Provide |
|---|---|
| Operating Temperature | Normal and maximum temperatures, and measurement locations |
| Installation Location | Inside the furnace, at the furnace wall, outside equipment, on piping or elsewhere |
| Imaging Requirements | Visible-light color, thermal, fixed, pan-tilt, 360° or mobile imaging |
| Communications | Ethernet, 4G / Wi-Fi or integration with an existing monitoring system |
| Certification Requirements | Explosion protection, ingress protection or other site-specific requirements |
Next Steps
Need Help Selecting a Solution?
Share the operating temperature, viewing distance, site photos, equipment application and requirements for an initial assessment.