High-Temperature Camera for Vacuum Diffusion FurnacesVacuum Diffusion Furnace Camera
Double-wall stainless-steel housing. Compressed air cools the camera and is collected and discharged outside the furnace. Rated for ambient furnace temperatures up to 500°C under the specified cooling conditions.
Double Layer Stainless Steel Housing for Air Cooling
cooling camera below 40°C
Motorized Auto Focus
Temperature Detector on Camera, Display
Temperature on screen, Alarm out on Buzzer
Resistant to ambient temperature over 500°C
Onboard storage by Micro SD/SDHC
ONVIF (Profile S) Standard
The source describes a cooling / fiber-optic arrangement that reduces camera temperature below 40°C; the exact optical and cooling configuration requires manufacturer confirmation.
On-camera recording with temperature sensing, real-time on-screen temperature display and temperature alarm.
| Camera | |
|---|---|
| Image Sensor | 1/2.8” 3.21M Progressive Scan CMOS |
| Lens | 2.8 ~ 12.0mm (F1.2) motorized, auto IRIS |
| Min. Illumination | Color : 0.05 lux, B&W: 0.0005 lux / 0 lux (IR) |
| IR | 30 IR LED (optional built-in) |
| PoE | IEEE 802.3af |
| Video | |
| Streaming | Triple Streaming |
| Compression | H.264, MJPEG |
| Resolution | 2048x1536, 1920x1080, 1280x720, 704x480, 640x352, 320x176, 160x96 |
| Max. Frame Rate | 30fps, 25fps |
| Bit Rate Control | VBR, CBR (H.264 only, 32K~12Mbps) |
| Frequency Control | 60hz, 50hz |
| Buffer | Max. 5.0Mbyte pre/post alarm buffer |
| Privacy Masking | 8 privacy zone |
| Motion Detection | On (144 block selection), Off |
| Enhancement | WDR (1-50, Off) |
| Day & Night | TDN (Auto, B&W, Off) |
| White Balance | Auto |
| Noise Filter | 2DNR (On, Off), 3DNR (On, Off) |
| Image Adjustment | Hue, Saturation, Brightness, Contrast |
| Sharpness | Level 0~5 |
| Automatic Gain Control | Level 1~120 |
| Shutter Speed | Auto, Manual (1/30~1/24000) |
| Sense-up | Level 0~5 |
| Flip | Vertical (On, Off), Horizontal (On, Off) |
| PTZ | - |
| Interface | |
| Memory Slot | 1 Micro SD/SDHC |
| Network | |
| LAN | 10/100-base-T (auto sensing) |
| Protocol | HTTP, HTTPS, TCP, Unicast, TCP/IPv4/v6, UDP, FTP, Telnet, HTTPS, RARP, PPPoE SNMP, PAP, CHAP, DHCP, NTP, SMTP client, uPnP & etc |
| Standard | ONVIF (Profiles) |
| Viewer | Browsers (IE, Chrome, Firefox, Safari etc), CMS, Quick Time, VLC |
| Dynamic IP | DDNS (www.ipctvdns.com) |
| Smart Solution | IPCAM(VISION (iOS, Android) |
| Security | HTTPS, Encrypted & BasicAuthentication |
| Hardware | |
| System | 32bit Embedded Linux, 256Mbyte SDRAM, 128Mbyte NAND Flash |
| Approvals | KC/FCC/CE, RoHS, IP66 |
| Power Supply | SMPS, DC 12V/1A |
| Power Consumption | Max. 7.8W |
| Dimension | 100Ø x 141.5(L) x 102(H) mm |
| Weight | About 885g without Power Supply |
At a Glance
Operating Environment
High-temperature, hazardous, dusty or continuous-process environments requiring remote visual monitoring.
Key Benefits
Improve process visibility, reduce personnel exposure and relay anomaly information to the monitoring center.
Integration Options
Networks, alarms, thermal imaging, AI vision and centralized monitoring can be configured to suit project requirements.
Engineering Requirements
| Requirement | Information to Provide |
|---|---|
| Operating Temperature | Normal and maximum temperatures, and measurement locations |
| Installation Location | Inside the furnace, at the furnace wall, outside equipment, on piping or elsewhere |
| Imaging Requirements | Visible-light color, thermal, fixed, pan-tilt, 360° or mobile imaging |
| Communications | Ethernet, 4G / Wi-Fi or integration with an existing monitoring system |
| Certification Requirements | Explosion protection, ingress protection or other site-specific requirements |
Next Steps
Need Help Selecting a Solution?
Share the operating temperature, viewing distance, site photos, equipment application and requirements for an initial assessment.