Industrial Camera Systems
Compact Explosion-Proof 4G Camera
Explosion-Proof 4G Camera System
Key Features
- Ex d IIC T6; IP68 — Flameproof Enclosure
- Rechargeable lithium-ion battery; 10–15 hours of operation
- Motorized zoom and iris; autofocus
- 2-megapixel IP camera
- Day/night infrared operation (LED illumination optional)
- Wireless 4G / Wi-Fi transmission with on-camera recording for mobile use
- Built-in camera web server
- Video monitoring and recording system with electronic site maps
- Alarm input / output
| 4G LTE Wireless Module | LTE Module | LTE Cat. 4; 2 × SIM card slots |
| Ethernet | 2 × RJ45FE (WAN/LAN) | |
| Antenna Connection | 2 × SMA(F) for LTE, 1 × SMA(M) for Wi-Fi | |
| WAN Connection | LTE/Ethernet/Wi-Fi with Failover | |
| Wi-Fi | IEEE 802.11n Industrial Access Point / Router | |
| VPN | IPsec, Open VPN, PPTP, L2TP, GRE | |
| Rechargeable Lithium Battery Power System | Power System | Rechargeable lithium battery system |
MTL-Ex-MNC-4G
Camera
| Image Sensor | 1/2.8” 3.21M Progressive Scan CMOS |
|---|---|
| Lens | 5 ~ 50.0mm (F1.2) motorized, auto IRIS |
| Min. Illumination | Color: 0.05 lux, B&W: 0 lux |
| IR | 4 POWER IR LED, 50m |
| PoE | IEEE 802.3at |
Video
| Streaming | Triple Streaming |
|---|---|
| Compression | H.264, M-JPEG |
| Resolution | 2048×1536, 1920×1080, 1280×720, 704×480, 640×352, 320×176, 160×96 |
| Max. Frame Rate | 30fps, 25fps |
| Bit Rate Control | VBR, CBR (H.264 only, 32K~12Mbps) |
| Frequency Control | 60hz, 50hz |
| Buffer | Max. 5.6Mbyte pre/post alarm buffer |
| Privacy Masking | 8 privacy zone |
| Motion Detection | On (144 block selection), Off |
| Video Analytics | Optional (Face Detection, Tampering, Tripwire) |
| Smart Video | ROI |
| Enhancement | WDR (Enhanced, +50~+250, Off) |
| Day & Night | TDN (Auto, B&W, Off) |
| White Balance | Auto, Manual |
| Noise Filter | 2DNR (On, Off), 3DNR (On, Off) |
| Image Adjustment | Hue, Saturation, Brightness, Contrast |
| Sharpness | Level 0~255 |
| Automatic Gain Control | Level 1~500 |
| Shutter Speed | Auto, Manual (1/30~1/24000) |
| Sense-up | Level 0~5 |
| Flip | Vertical (On, Off), Horizontal (On, Off) |
Interface
| Video Out | 1 analog out |
|---|---|
| Audio In/Out | 2 way (1 in, 1 out) |
| Audio Compression | G.711 |
| Alarm In/Out | 1 DI, 1 DO |
| Serial Port | RS-232C, RS-485 |
| Peripherals | 1 USB 2.0 |
| Memory Slot | 2 Micro SD/SDHC |
Network
| LTE Module | 1*LTE-Cat.4, 2*SIM |
|---|---|
| Protocol | HTTP, RTP/RTSP (Uni/Multicast), TCP/IP(v4/v6), UDP, FTP, Telnet, HTTPS, RARP, PPPoE, SNMP, PAP, CHAP, DHCP, NTP, SMTP client, uPnP & etc |
| Standard | ONVIF (Profile S) |
| Viewer | Browsers (IE, Chrome, Firefox, Safari etc), CMS, Quick Time, VLC |
| Dynamic IP | DDNS (www.ipcctvdns.com) |
| Smart Solution | IPCAMVISION (IOS, Android) |
| Security | IP filtering, HTTPS, Encrypted & Basic Authentication |
Hardware
| System | 32bit Embedded Linux, 256Mbyte SDRAM, 128Mbyte NAND Flash |
|---|---|
| Approvals | KC/FCC/CE, RoHS, IP66 |
| Working Condition | -20°C ~ +60°C, 10% ~ 90% RH |
| Power Supply | SMPS, DC 12V/3A & AC 24V |
| Power Consumption | Max. 13.8W |
At a Glance
Operating Environment
High-temperature, hazardous, dusty or continuous-process environments requiring remote visual monitoring.
Key Benefits
Improve process visibility, reduce personnel exposure and relay anomaly information to the monitoring center.
Integration Options
Networks, alarms, thermal imaging, AI vision and centralized monitoring can be configured to suit project requirements.
Engineering Requirements
| Requirement | Information to Provide |
|---|---|
| Operating Temperature | Normal and maximum temperatures, and measurement locations |
| Installation Location | Inside the furnace, at the furnace wall, outside equipment, on piping or elsewhere |
| Imaging Requirements | Visible-light color, thermal, fixed, pan-tilt, 360° or mobile imaging |
| Communications | Ethernet, 4G / Wi-Fi or integration with an existing monitoring system |
| Certification Requirements | Explosion protection, ingress protection or other site-specific requirements |
Next Steps
Describe Your Site ConditionsNo model selection required
Initial Engineering ReviewConfirm the appropriate system architecture
Solution & QuotationRecommendations based on specifications
Project ImplementationInstallation, testing and integration
Need Help Selecting a Solution?
Share the operating temperature, viewing distance, site photos, equipment application and requirements for an initial assessment.